Nicobuild
Electrolytic Nickel Plating
This process was exclusively developed by Electromold (VIC) Pty Ltd in 1988 and combines years of experience with many outstanding achievements.
Our Nicobuild process is an electrolytic plating process which uses an electric current to selectively deposit hard nickel onto a metalic surface. Unlike welding Nicobuild uses NO heat, and therefore no distortion or annealing will occur. The deposit has a hardness ranging from approximately 50 Rockwell C to 55 Rockwell C and in some cases as high as 65 Rockwell C. The deposit thickness can vary from a few microns to a heavy deposit with no maximum thickness.
» Download our Nicobuild PDF factsheet for more information (1.3MB)
202 Holt Parade Thomastown VIC 3074 Tel (03) 9464 0922 Fax (03) 9464 0548